Paranormal Investigators Of Milwaukee

Subscribe to monthly
Newsletter

NAME:
ZIP CODE:
EMAIL:
Enter code here:
Security Code
reload image

This web form is protected from SPAM by SnapHost.com
Please check out PIM's Newsletter Archives!

PIM has officially partnered
with Allison Jornlin of
Milwaukee Ghost Tours!


FLIR TG165 Thermal Imaging Camera
  • Featuring FLIR's Innovative Lepton IR Imaging Engine, with 80x60 resolution, 150mK sensitivity, and a 9hz refresh rate
  • Intuitive to operate with no special training required, and featuring a safe 24:1 spot size ratio for safer distance measuring
  • Easily save images and data to the included 8gb micro sd card for documentation
  • Download images fast over USB with included cable or from removable micro SD
  • Compact and durable to easily stow in a crowded tool bag, and covered by 2 Years Product, and 10 Years Thermal Imaging Detector
  • Excellent for ruling out animal activity on investigations


Full Spectrum 4K POV Camera
  • 4K Ultra HD resolution (double the quality of 1080p), 120fps @ 720p
  • Exposure boost for brighter shots in low light
  • Live View via Wi-Fi with your phone/tablet free download
  • Unlimited power! Plugs into power or USB battery
  • Wide-angle lens to capture it all
  • Rechargeable and replaceable battery - swap them out as needed


GoPro Hero3+ Full Spectrum
  • Converted to Full Spectrum
  • HERO3+ captures gorgeous, professional quality 1080p60 video and 10MP photos at speeds of up to 10 frames per second.
  • Built-in WiFi enables you to use the GoPro App to control the camera remotely, preview shots and share your favorites on Facebook, Twitter and more.
  • Combined with stunning low light performance, high performance audio and an ultrawide angle glass lens, HERO3+ Silver makes capturing and sharing your life easier than ever.
  • PIM uses for live video broadcasting of our investigations


Sony FDR-AX100 4K
  • Capture 4k/30p video that far exceeds HD resolution
  • 1" Exmor R CMOS sensor with Direct Pixel Read Out
  • 14MP resolution video and 20MP still image capture




Sony HDR-CX160 Full Spectrum
  • Converted to Full Spectrum via Infraready.com
  • 1920x1080 Full HD 60p Recording w/3MP still image
  • 16GB embedded Flash Memory for up to 6 hours of recording
  • Wide Angle G lens to capture everything you want
  • 42x Extended Zoom to get even closer to the action
  • Back-illuminated "Exmor R" CMOS sensor for superb low-light video
  • Also equipped w/0.6X Wide angle lens and 64 GB Extreme SD card for investigations


Sony HDR-CX440 Full Spectrum
  • Converted to Full Spectrum
  • 26.8mm ZEISS Lens w/30x Optical/60x Clear Image Zoom
  • View on 2.7" Clear Photo Plus™ LCD display
  • Optical SteadyShot image stabilization w/Active mode
  • Automatically creates highlight video in MP4 from multiple clips
  • Connect, control, backup and share wirelessly with NFC2/Wi-Fi
  • Broadcast LIVE from your camcorder using Ustream™4 live-streaming


Sony HDR-CX550
  • 1920x1080 Full HD Recording w/12MP still image
  • 64GB embedded Flash memory
  • 1/2.88" 6MP back-illuminated "Exmor R" CMOS sensor
  • Optical SteadyShot image stabilization w/ Active Mode
  • Wide Angle G-Lens (26.3mm) with 10x Optical zoom


Sony HDR-SR7
  • Record high-definition (AVCHD) video directly to a 60GB HDD
  • ClearVid CMOS sensor; Carl Zeiss Vario-Sonnar T lens
  • 2.7-inch widescreen hybrid touch-panel Clear Photo LCD Plus display
  • Simultaneously capture video and 4.6-megapixel still images while recording. 6.1 megapixel still images as camera only
  • Includes Handy Cam station; one touch AVCHD disc burn with optional accessory


Sony HDR-XR200V
  • 2.7" wide touch panel3 Clear Photo LCD PlusTM display
  • 15X Optical / 180X Digital Zoom
  • Dolby Digital 5.1ch recording with Built-in Zoom Mic
  • Active Interface Shoe




SpecterCam4
  • Discontinued full spectrum camera
  • Can shoot in near zero lux without ANY illumination
  • Equipped with three different lenses for full spectrum or just IR shooting
  • Can be hooked to DVR system or record to portable DVR (JXD990) making the camera more portable
  • "Boxes" motion in video when detected




Sony HVL-HIRL
  • Works as infrared ray light and 3-watt video light for NightShot
  • Fits easily as HotShoe accessory for Sony Handycams
  • NightShot works up to 23 feet, Super NightShot up to 66 feet
  • Automatic and manual settings for variable light intensity
  • Includes accessory pouch




Sony HVL-IRM
  • Extend the range of Nightshot system from 10 feet to 100 feet
  • Infrared emission for shooting in total darkness
  • Adjustable light output
  • Powered by 2 AA batteries or InfoLithium M series battery packs



Phantom IR Light
  • 25 LED Infrared Illuminator
  • Turn Night Into Day 50+ Feet Illuminated in total darkness
  • 9v battery over 12 hour run time with 1 battery!!




Large IR Illimuniator
  • 140 LED IR Infrared Illuminator Lamp
  • Built-in sensor
  • Illuminating range: Detecting range is 80m, viewing range is 60m (outdoor)
  • Definition Consumed power: 18W
  • Wave length : 850nM
  • Structure: All weather aluminum and reinforced glass
  • Power: DC 12V 1000mA (Included)


Sony VCL-E07A Wide Angle Lens
  • Wide angle lens used on most PIM cameras
  • Comes with adapters to fit multiple camera lens sizes




Sony NP-FH100 Battery
  • ActiForce technology ensures fast recharge rate, extended power & optimal performance in all weather conditions
  • Compact and lightweight InfoLithium(R) H Series Rechargeable Battery Pack
  • 10 WHr, 6.8V, 3900mAh




Sony NP-FV100 Battery
  • ActiForce technology ensures fast recharge rate, extended power & optimal performance in all weather conditions
  • Designed for use with High Definition video cameras
  • Compact and lightweight InfoLithium(R) V Series Rechargeable Battery Pack
  • Mean output 6.8V, 26.5 wh(3,900mAh)




Sony NP-QM71D Battery
  • Allows up to 250 minutes of continuous recording time
  • One-touch display gives you power level information any time, anywhere
  • Resists memory effect and will not prematurely reduce your recording time
  • Includes an on-board LED battery remaining indicator
  • 19.9WHr, 8.4V, 2760mAh

Canon Rebel XTi
  • 10.1-megapixel CMOS sensor captures enough detail for photo-quality 18 x 24-inch prints
  • Large 2.5-inch LCD display; includes Canon's EF-S 18-55mm, f3.5-5.6 zoom lens
  • New self-cleaning dust function, plus Dust Delete Data Detection in included software
  • DIGIC II Image Processor provides fast, accurate image processing; Picture Style settings for added creative control
  • Stores images on Compact Flash (CF) memory cards; powered by battery pack NB-2LH



Samsung SL202
  • 10.2-megapixel resolution for large, photo quality prints
  • 3x optical zoom; 2.7-inch LCD screen
  • Digital image stabilization; Face detection
  • Perfect Portrait System: Face Detection, Smile Shot, Blink Detection, Beauty Shot
  • Capture images to SD/SDHC/MMC cards (not included)



Sony DSC-H70
  • 10x zoom in a compact camera body
  • Capture breathtaking images in Sweep Panorama Mode
  • Capture your videos in HD Movie mode (720p)
  • 25mm wide lens; Optical SteadyShot image stabilization
  • Active Mode stabilizes your hand held HD movies



Tascam DR-10L
  • 44.1Khz/48Khz, 16/24-Bit Linear Pcm Mono/Poly Recording / Easy-to-read EL Display
  • Supports WAV Format (Compatible with BWF Format) / micro USB B Port enables Easy Data Transfer
  • Supports Microsd/SDHC Cards Up to 32GB / Automatic File Closing Function Prevent Data Loss
  • Lavalier Microphone with Mic Clip Included / Low/Mid Low/Mid/High/High Plus Recording Level Settings
  • Sliding Record Switch & Hold Function / Low-Cut Filter



Tascam DR-05
  • Built-in omni-directional microphones
  • Stereo mini headphone jack for external stereo microphones (provides plug-in power) / External line input
  • Tempo change (VSA) function for adjusting the speed from 0.5 to 1.5 times (in 0.1 increments)
  • Chromatic tuner, Powered by 2 AA batteries, USB power or optional AC adapter (Tascam PS-P515U), MicroSD 4GB card included



Tascam DR-07MKII
  • Adjustable Stereo Condenser Microphones (XY or AB)
  • Up to 96kHz/24-bit WAV (BWF) linear PCM recording. Stereo MP3 recording from 32-320 kbps bit rate. Reverb effect. Overdub recording mode
  • Auto Record and Auto Mark functions. Peak Reduction function, optimized for music recording, automatically sets the gain of while recording. Limiter and low-cut filter to help prevent distortion
  • Variable speed playback (50%-150%) without changing the pitch. Loop and repeat playback. Level Align feature prevents uneven volume levels during playback
  • Playback EQ setting. Editing function (Divide and delete). Chromatic tuner 1/8 Inches stereo mic/line input. Powered by 2 AA batteries, AC adapter (optional: PS-P515U), or USB bus power. MicroSD 2GB card included



Zoom H1
  • Stereo X/Y mic configuration captures perfect stereo images
  • Same frequency and SPL handling as popular Zoom H2
  • Records Broadcast WAV (BWF) at 96kHz/48kHz/44.1kHz at 16-bit or 24-bit
  • Records MP3 from 48 to 320kbps for maximum recording time
  • Hi-Speed USB 2.0 port



Zoom H2n
  • Five built-in mic capsules provide Mid-Side (MS) stereo, 90 degree X/Y stereo, 2-channel and 4-channel recording modes
  • Key Control, A-B Repeat, File Dividing, Normalize, MP3 Post-Encode, Marker and Surround Mixer
  • Additional functions include Lo-cut Filter, Compressor/Limiter, Auto Gain, Pre-Rec, Auto-Rec, Tuner, Metronome, Variable Speed Playback
  • Records in WAV up to 24-bit/96kHz and MP3 up to 320kbps
  • Over 20 hours of operation on 2 AA batteries



Progressive Electronics 200B Inductive Amplifier (modified)
  • Is used in the telephone industry to locate wires in walls without having direct contact with the wires
  • Detects AC current
  • Modified with an on/off switch instead of the push and hold on and also modified with 10 uF 16 V Tantalum capacitor to increase gain of unit
  • Link to modify unit is located here. (Scroll to bottom)



Belfry Bat Detector
  • Complete conversion of ALL bat echolocation frequencies
  • No tuning required
  • Belfry Bat Detector will pick up bat echolocations up to 200 feet away
  • Bat calls are heard clearly through an internal speaker - no clumsy earphones or earpieces to play with
  • With the optional audio out jack plug the Belfry Bat Detector into a digital voice recorder or laptop
  • In paranormal investigation, this can be used to pick up ultrasonic frequencies that our ears can't pick up



Energy Speaker
  • The ES can turn any portable electronic device like a MP3 player, recorder or even ipod or cell phone into a magnetic broadcast system
  • Plug the ES into your portable device earphone jack or audio jack
  • Turn the device on and the audio will be converted to a magnetic audio format
  • It is theorized that EVPs may actually be EMF fields
  • This device can be used to record questions in EMF that can be played back. If the entities are communicating via EMF it is easier for them to "hear" it too



Mel-8704R
  • EMF - Ambient Temp. - Red Flashlight - EMF Radiating Antenna
  • Detects EMF & Cold Spots Simultaneously
  • EMF "Burst" Mode Feature for Rapid EMF Detection
  • Easy to see "Red Nightview" Backlight Display w/ On/Off Button
  • Glow in The Dark Push Buttons
  • Fast Response Thermocouple Temperature Sensor
  • Record Feature Captures Min & Max Values
  • Five level milliGauss ranges 50 & 60 Hz operation
  • Accuracy of 5% at 50-60Hz



Mel-8704REM ATDD SDD
  • EMF - Ambient Temp. - Red Flashlight - EMF Radiating Antenna
  • Detects EMF & Temperature Simultaneously
  • ATDD is a hot and cold spot detector that will set off a blue light or red light for an increase or decrease of 1 degree or more along with an audible alarm
  • SDD is a shadow detection system that has a long range and short range red LED light that if broken will cause an LED light and audible alarm to go off
  • Color of light and audible tone depends on if there is an increase or decrease in light being detected
  • EMF "Burst" Mode Feature for Rapid EMF Detection
  • Easy to see "Red Nightview" Backlight Display w/ On/Off Button
  • Glow in The Dark Push Buttons
  • Fast Response Thermocouple Temperature Sensor
  • Record Feature Captures Min & Max Values
  • Push On/ Push Off Sound Switch for Radiating Antenna.
  • Easy to read Multi-Color (Green, Yellow, Orange & Red) LED's
  • Five level milliGauss ranges 50 & 60 Hz operation
  • REM Feature radiates 360 deg.
  • Accuracy of 5% at 50-60Hz
  • Instantaneous Response To REM Field Interruption


Mel-8704R-VIBE
  • EMF - Ambient Temp. - Red Flashlight - EMF Radiating Antenna
  • Detects EMF & Cold Spots Simultaneously
  • EMF "Burst" Mode Feature for Rapid EMF Detection
  • Easy to see "Red Nightview" Backlight Display w/ On/Off Button
  • Glow in The Dark Push Buttons
  • Fast Response Thermocouple Temperature Sensor
  • Record Feature Captures Min & Max Values
  • Easy to read Multi-Color (Green, Yellow, Orange & Red) LED's
  • Five level milliGauss ranges 50 & 60 Hz operation
  • Accuracy of 5% at 50-60Hz
  • High Sensitivity (1Hz-10Hz)Vibration / Touch Detection - 2 sec. Beep and Blinking Light with Auto Reset


Magnii DSP-521N
  • The DSP-521N resolution is now 0.01 mG over the entire 0 to 99.99 mG range! This is the only AC gaussmeter in the world to feature resolution to 0.01 mG over such a wide range!
  • The DSP-521N features a super fast update rate of 4 times per second. This fast update rate allows you to sweep areas faster, as well as track down sources faster.
  • A green LED backlight lets this meter go where others can't - the dark. Want to conserve battery life or don't want the backlight? No problem, turn it off with a simple jumper in the battery compartment.
  • True-RMS readings are accurate for not only pure sine waves, but any field, even transient fields. Think you can only get True-RMS from big bulky desktop meters? Think again, the DSP-521N weighs just 3.8oz and can easily fit in your pocket, and is smaller than most other handheld gaussmeters. At just 4.4" x 2.6" x 1.1", it makes a great, but slim, addition to any toolbox.
  • Most magnetic fields around us are at powerline frequencies - 50Hz in Europe, and 60Hz in North America. These fields also contain strong harmonics at multiples of the main frequency (60, 120, 180, 240 Hz, etc). By placing sharp and accurate notches at every frequency associated with powerlines, you now have the capability of measuring everything else. In other words, a field at 20, 40, 70, or 100 Hz will be measured, while 60, 120, 180 Hz, etc., will be ignored.
  • By comparing the total field strength with the field strength with powerlines ignored, you can know instantly whether a field is from powerline frequencies or another source. Measure the field from a DC motor, or the fields inside your car without worries of contamination from powerlines. A great tool for looking for transient fields not associated with powerlines!



Magnii DSP-523
  • Accuracy: ±(4% + 4 digits) from 48 to 62 Hertz
  • Flat frequency response: ±½dB 30 to 300 Hz; -3dB 15 to 330 Hz
  • Range 0-250 mG (auto-ranging)
  • Highest resolution: 0.01 mG
  • True RMS Measurements
  • Three Axis Detector, selectable (3-Axis, X, Y, Z)
  • Two display styles: On-Screen Graphing of total RMS, Notched and Bandpassed field strength
  • Dual readout: Compare total RMS strength plus select: IGNORE 60Hz Only or 60Hz+Harmonics
    BANDPASS 60Hz Only or 60Hz+Harmonics
  • Blue LED Backlight, variable brightness
  • Max Hold on ALL features
  • Update Rate: 1.6 times per second
  • Selectable units: milliGauss or microTesla
  • External power jack to run unit with optional AC power adapter
  • Unit Weight (without battery): 7.2 oz



Natural TriField Meter
  • The meter is sensitive to changes of as little as 0.5% of the strength of the Earth's magnetic field, and the tone will sound whether the field increases or decreases. After the meter detects an event, when the magnetic field then becomes stable for more than about five seconds, the tone will stop and the needle will return to zero. The meter will remain at rest until the field changes again. The threshold level (squelch level) of the tone is adjustable.
  • When the dial is set to ELECTRIC, the meter is sensitive to electric fields as weak as 3 V/m (volts per meter). Indoors, electric fields typically fluctuate 1 or 2 V/m. By setting the minimum sensitivity to change at 3 V/m, we have designed the meter to disregard this "background noise". A 3V/m field is so feeble that if a 10'x10'x10' room were filled with a field of this strength, it would contain the total amount of energy equivalent to that required to lift a single grain of table salt 1/50th of an inch.
  • The radio/microwave detector is sensitive from 100,000 to 2.5 billion oscillations per second (100 KHz to 2.5 GHz) and can detect strong or unusual atmospheric electrical activity. It can also detect leaky microwave ovens, cellular or portable phones, walkie-talkies and concealed surveillance bugs. Its minimum and maximum detectable signal strengths are 0.01 milliwatt/cm2 and 1 milliwatt/cm2 respectively. For more information please visit here



Trifield 100XE EMF Meter
  • Magnetic, Electric, and Radio/Microwave detection all in one package
  • Omni-directional electric and magnetic sensitivity
  • Extra sensitive model that is sensitive down to 5 Hz
  • Modified with audible alarm, red LED light, and datalogging output port
  • Also have USB connector to be able to use meter as EMF datalogger when coupled with a laptop
  • Three-Axis



Air Ion Counter
  • Air flow: 400 cc/sec. Linear speed is 80 cm/sec through a polarization field of 2500 V/m and the system is designed to collect 60% of the ions in still air at this speed. A lower percentage is collected if air is forced faster than 80 cm/sec through the inlet slot, and a higher percentage than 60% is collected if a reverse air flow slows the air flow. This maintains the accuracy in windy conditions. It is within specified accuracy for air flow from 200 to 800 cc/sec.
  • Dynamic Range: For the standard "2 million" version, 10 - 1,999,000 ions/cc, both selectively "+" and selectively "-". For the "20 million" version, range is 100 - 19,990,000 ions/cc. For "200 million", it is 1000 - 199,900,000 ions/cc.
  • Setting time: Approx. 1 second (response time), and 10 sec (after switchover between "+" and "-")
  • Noise level: (2 second-weighting) approximately 10 ions/cm3
  • Input resistance: 1010 Ohms.
  • Accuracy: +/-25% for fast ions (mobility greater than 8 x 10-5 m/s per V/m - these are the most numerous ions. The Air Ion Counter is less sensitive to "slow" ions such as charged pieces of dust). Stays within 25% for air speeds up to 15 km/hr in any direction. Temperature range is -10 to +50C (14 to 122F). Humidity: up to 90% (condensing).
  • For more information please visit here


PIM Pod
  • Negative ions appear to play a role in entity manifestation. It has been witnessed that just prior and during a paranormal event, negative ions in the proximity will raise like a thunderstorm is near
  • The pod will detect the presence of free ions in the air
  • The light goes on or off depending if its detecting negative or positive ions
  • Negative ions turn the LED off; it lights again when removed
  • Positive ions make the LED bright, then dark when removed
  • This unit was built by PIM member Randy. Contact us for schematics to build one yourself



GQ GMC-300 Geiger Counter Datalogger
  • Measures beta and gamma radiation
  • Sensitivity to gamma radiation 0.1-1 MeV
  • LCD Display
  • Powered by a 9V battery
  • For more info visit here




GQ GMC-320 Geiger Counter Datalogger
  • Measures beta and gamma radiation
  • Sensitivity to gamma radiation 0.1-1 MeV
  • LCD Display
  • Built in gyroscope and temperature
  • Powered by a 9V battery
  • For more info visit here




Ecotest MKS-05 Terra-P Radiation Meter
  • Measures a, b, and g radiation
  • Digital display
  • Uses 2 AA batteries
  • For more info visit here




General Tools DCO1001 CO Meter
  • CO range 0 to 999ppm
  • Resolution 1 ppm
  • Kit includes 3 - AAA batteries operation manual, wrist strap and carry pouch
  • Battery life is 250-Hour
  • Auto power off



Kestrel 3500 Pocket Weather Meter
  • Measures temperature, wind speeds, barometric phenomena, pressure trends of up to 3 hours
  • Measures wind chill, air/water/snow temperature, current/average/maximum wind speeds
  • Also measures altitude, relative humidity, dewpoint, barometric pressure (with trend)
  • Innovative design for stability and accuracy in abrupt condition changes
  • User-replaceable CR2032 coin cell battery; 5-year warranty


EDI+ Meter
  • Multi-Use Display: The EDI+ utilizes a fast-response screen to display the exact readings from each sensor. With just a touch of a button you can switch the display to any one sensor readout. This way you can get an exact and quick readout of the EMF, thermometer, pressure or humidity.
  • EMF Meter with Sound: The EDI+ utilizes a highly sensitive Electromagnetic Field Sensor detecting even small changes in the electromagnetic field around the device. The display shows you an exact reading of the EMF strength in addition to a traditional lighted scale. You will also hear when spikes occur with an audible tone indicating EMF spikes. The speaker can be turned on/off as you desire. Single-axis detection.
  • Ambient Thermometer: The EDI+ contains an ambient temperature sensor with a real-time digital display. In addition to the digital readout there are LED light indicators that light to alert you to spikes or drops in temperature. Blue when the temperature drops and orange/red when it gets warmer. The unit of measurement can be switched to display Fahrenheit or Celsius.
  • Vibration Sensor: The EDI contains a highly sensitive geophone for detecting vibration. A built-in accelerometer is programmed to pick up the slightest movement on the surface it is sitting on. Even a small touch on the table will set off the indicator panel. This features is very helpful on cases with reported footsteps, knocking and moving objects. Like a graph, the device will light up the amount of LEDs based on the intensity of the vibration or movement. This can be toggled on/off if the device is being used in a hand-held fashion.
  • Air Pressure: The EDI+ also detects changes in pressure. The readout will display the live readings.
  • Humidity: The EDI+ also detects humidity within the air around the unit. The readout will display the live readings.
  • Flag your timeline for special review. During your investigation you can tell the EDI+ to mark a certain point in the data for special review. If something occurs during your investigation that you feel should be noted on the data, the EDI+ will flag the file for you to take note of later during review.
  • Review results on your computer. The EDI+ data logger stores all investigation information on an SD card. Download the free graphing application built just for the EDI+ which will graph the data over the investigation allowing you to analyze everything at any given time. Just insert the SD card into your computer via any SD card reader and load the data log into the application. It's simple to use. The raw data can also be loaded in any data or spreadsheet application of your choice.



DM-X930 Dark Matter Detector

FEATURE DM-X930 FEATURE DM-X930
EMF Sensor 3 coil, 3-axis 4 GB microSD card Yes
ELF EMF 2Hz-40Hz Yes, 3-axis Headphone jack for live listening Yes
VLF EMF 40Hz-12KHz w/60Hz digital notched filter Yes, 3-axis Audio recorded to microSD card Yes
AC Power EMF (60Hz & 50 Hz) Yes, 3-axis Sensor data recorded to microSD card Yes
Temperature Sensor Yes Data & Audio is time stamped Yes
Low Mass Air Temperature sensor Yes Touch Control Color Graphic Display Yes
Rapid IR Surface Temperature Sensor Yes, optional USB data file and audio access Yes
Digital Rapid Barometric Pressure Yes Internal rechargeable battery & USB cable charging Yes
Power Drain Sensor Yes Direct Recording of EMF as audio Yes
Integrated Microphone Yes Included data analysis software Yes



Extech RHT50 Temperature/Humidity/Pressure Datalogger
  • Datalogs up to 30,000 readings (10,000 each of temperature, humidity, and barometric pressure) with a user programmable sample rate
  • Selectable data sampling rates from one minute to 18 hours
  • User programmable alarm thresholds
  • Dew point indication via Windows software
  • Status indication via red/yellow/green LEDs
  • Long battery life of approx. 1,000 hours



Midland GTX1000VP4 two-way radios
  • 50 Channels with Up to 36-Mile Range
  • NOAA/All Hazard Weather Channels with Alert and Weather Scan
  • 387 Privacy Codes
  • Vibrate Alert
  • 9 Levels of VOX for Hands Free Operation







IR Motion Sensor that emits light
  • Infrared beam triggers a white light when broken
  • An alternative to the motion sensors that activate loud sounds so not to startle investigators during an investigation
  • Used to monitor rooms or areas that there is reported activity of movement where investigation won't take place
  • For more information please visit here







EM Pump V.2
  • Same operation as version 1 with some changes
  • Single red light increases in intensity as the EMF field strength increases
  • Smaller in size than version 1 with much better battery life
  • A great energy source of EMF for spirits to manifest




EM Vortex
  • This multi coil device creates a rotating field from 2 hz to 24 hz and has clockwise and counterclockwise rotating capability
  • Supposed to act like a "siren" that will attract the attention of entities
  • A great energy source of EMF for spirits to manifest




Aikoh RX-50 Digital Force Gauge
  • Large and easy view display with reversible function
  • Memory of 1000 data
  • Insert and pull-out test by single axis
  • High speed communication (38400bps) is possible
  • Auto-power off function
  • High accuracy is assured based on our special calibration method
  • Comes with 6 accessories to determine both push and pull forces
  • Great for determining how much force it takes to shut a door or push an object off a shelf





Geophone
  • Custom built by PIM
  • Has adjustable sensitivity
  • Completely encased for protection of electronic component
  • Lid allows for easy change of 9V battery




Ion Generator
  • Negative ions appear to play a role in entity manifestation. It has been witnessed that just prior and during a paranormal event, negative ions in the proximity will raise like a thunderstorm is near
  • By using an Ion Generator, it is believed that an investigator will increase the chances of witnessing paranormal activity. The Ion Generator simply supplies ions to the air that allows entities to feed off the ions around it
  • Ions also remove static from its surroundings and puts dust to the floor, helping with the dreaded dust orbs
  • Place the machine three feet off the floor or the ground at least 30 minutes before investigating - in close proximity, approximately 60' radius - as to raise the ion levels in the surrounding area



Science First Tesla Coil
  • The 50,000 volt capacity generator radiates high frequency energy through space... enough to light fluorescent tubes two feet away
  • It uses 115 VAC (60 Hz) with an electro-magnetically operated interrupter buzzer, high voltage capacitors, inductive coil transformer, and a monopolar high frequency transformer generator to do the trick
  • 11" high, with a 6" sq. x 2" high protective housing for the generator
  • Used to generate negative ions and plasma on investigations



Energizer UV Cap Light
  • Hands-free light attaches to brims of caps and visors
  • Over the brim design does not obstruct vision
  • Flood beam for wide, close-up illumination
  • Recessed push button switch to prevent inadvertent activation
  • Light-weight and water resistant
  • Uses 2 CR2032 batteries
  • 3 Nichia LEDs



12-Volt Jump-start and Power Supply
  • Automatic cutoff prevents overcharging
  • Charge/battery level indicator
  • 400 amp boost rate/900 amp peak
  • Maintenance-free, 17 amp hour battery
  • 12v power port for powering 12V accessories
  • Easy-to-read charge/battery indicator
  • Work light